|
|
INDUSTRIAL OIL :
We are a leading Supplier & Distributor of Industrial Oil such as Light Diesel Oil, White Oil, Shuttering Oil, Heat Transfer Oil, Drawing Lubricant, Transformer Oil and many more items from India.
 Approx. RS 40 / Liter(s). |
Description: Light Diesel Oil falls under class C category fuel having flash point above 66OC. It is a blend of distillate components and a small amount of residual components. It is marketed under BIS 1460-2000 specification for Diesel fuels.
Whereas HSD is used as a fuel for high-speed engines having 750 RPM and above in most of the prime movers used, LDO is used in lower RPM engines. It is used in Lift irrigation pump sets, DG Sets and as a fuel in certain boilers and furnaces.
Application: Light Diesel Oil is used as burning fuel in foundry's and boilers. |
|
 Approx. Rs 60 / Litre(s) |
Description: Any of various highly refined, colorless hydrocarbon oils of low volatility and a wide range of viscosities; used for lubrication of food and textile machinery and as medicinal and mineral oils. Also known as technical white oil.
Application:
These oils are especially used in medicine and in pharmaceutical and cosmetic preparations. |
|
 Approx. Rs 150 / Litre(s) |
Description: Oil Base Shuttering Oil and Water Base Shuttering Oil are specially formulated mold release agent and shuttering oil made from blend of mineral oils and eco-friendly high viscosity additives, which helps in easy release of form work and provides an excellent finish to the concrete. These oils are useful in mold release agent for application to MDF, ply, timber, steel and plastic faced framework/ molds prior to casting of concrete to achieve clear and smooth release. These oil is a ready to use product should be applied in thin and easy layer, preferably by cotton or brush.
Application:
Shuttering oil is widely used in hydraulics and construction industries. |
|
 Approx. Rs 150 / Litre(s) |
Description: This oil is a thermic fluid to cover a broad range of heat transfer applications. In actual practice the product is heated by means of a conventional source of energy, and circulated through a system which requires the heat. This indirect form of heating a system is widely used to achieve a better control and uniform distribution of heat.
Application:
They are used in all types of heat transfer application, the product finds extensive application in textile, pharmaceuticals, chemical and processing industries. |
|
 Approx. Rs 150 / Litre(s) |
Description: A very important segment of the metal working industry is metal forming, in this process the metal instead of being cut or machined, is forced to flow to acquire the desired dimensions by the use of the suitable mechanical equipment. Metal forming process includes operations like pressing, stamping, deep drawing, wire drawing, tube drawing and forging. During these operations considerable amount of heat and stress are developed. These lubricants are made to satisfy the various requirements included in metal drawing/forging operations.
Application:
The product has been specially developed for aluminum wire drawing applications. This product ensures nil wire breakage and scouring. This product is recommended for high speed drawing and can be used in the gear box of drawing equipment.
Also another grade of this product can be used for deep drawing of wires, tube drawing, forming, spinning and another similar medium to heavy duty operations of carbon steels and non ferrous metals. |
|
 Approx. Rs 150 / Litre(s) |
Description: A high-quality insulating oil in which windings of large power transformers are sometimes immersed to provide high dielectric strength, high insulation resistance, high flash point, freedom from moisture, and freedom from oxidization.
Application:
Transformer oil or insulating oil is usually a highly-refined mineral oil that is stable at high temperatures and has excellent electrical insulating properties. It is used in oil-filled transformers, some types of high voltage capacitors, fluorescent lamp ballasts, and some types of high voltage switches and circuit breakers. Its functions are to insulate, suppress corona and arcing, and to serve as a coolant. |
|
 Approx. Rs 150 / Litre(s) |
Description:
These oils are Di-electric in nature, the oil is low in viscosity which in turn leads to flawless operation over a broad range of metal removal rates. Apart from this, the low viscosity of the oil provides uniform cooling of both electrode and work piece while allowing rapid settling of the metal particles.
Application:
They are used for general purpose mould and dies work where good flushing, close tolerances and optimum rates of metal removal are important. Some of its salient features are:
|
|
 Approx. Rs 150 / Litre(s) |
Description: Grade I:
They are light bodied, naphthenic type rubber process oil specially developed for the automotive tyre and tube manufacturing industries, as well as for general usage in various units producing rubber goods. It can be used for processing natural rubber as well as butyl rubber. Due to its non-staining nature is used with advantage in the production of white wall automotive tyre and light color rubber components. Grade II:
They are medium bodied predominantly paraffinic type rubber process oil. This product is an excellent ingredient for the manufacture of various rubber products from both natural as well as Synthetic rubber. It is formulated from carefully selected highly refined, solvent extracted base stocks of low sulphur content.
It helps in achieving lower milling temperature, shorter milling time thus resulting in substantial savings in power consumption. It helps impart low heat buildup properties, and good air retention ability, and hence is mostly preferred by the automotive tube manufacturing units.
Application: Grade I:
It is used as one of the essential components in the processing of rubber for the manufacture of automotive tyres, tubes and many other moulded rubber goods. The ease of processability of rubber compound and the tensile strength of the finished product are the two most important properties in a large number of rubber products. The dynamic properties like low heat build up and good rebound resilience are the additional properties, which improve the overall quality, in case of automotive tyres. Grade II:
It is primarily used in the compounding of rubber for procession of automotive compound particularly where butyl rubber is used. The selection of a process oil for compounding of rubber, needs careful consideration as the type of oil used affects the final properties of goods manufactured. It improves the elongation strength and tear strength of the cured stocks. It also gives improved ageing properties to the finished rubber goods. It is widely used in compounding of shredded rubber and in the production of large number of light colored rubber articles
|
|
 Approx. Rs 150 / Litre(s) |
Description: These are dewatering fluid, containing oil soluble surface-active agent dissolved in a solvent with suitable corrosion- preventive and film forming materials. It contains selected additives which impart excellent ability to wet metal surfaces in preference to water. It can be applied at room temperature by dip or spray method. The film formed over metal surfaces can be easily removed by dipping the parts in suitable solvent.
Application:
This oil provides effective protection against rust on to the work-pieces during short-term storage in between operations. When the work-piece is dipped in the oil the water adhering to the metal surface gets dislodged by a thin film of this product. After the application, the solvent evaporates, leaving a soft grease like protective film on the metal surface. |
|
 Approx. Rs 150 / Litre(s) |
Description: The term quenching normally refers to the controlled cooling of steel components in a fluid to give specified properties. The hardness and other physical properties obtained depend upon the composition of the steel, dimension of the component, the time and temperature of the heat treatment and the speed and duration of the quenching process.
A number of quenching mediums such as molten salts, brine solutions and synthetic quenchants can be used, but petroleum based quenching media find the widest application due to the following advantage: Good Thermal properties, good chemical and oxidation stability, high boiling points and low volatility, high flash and fire points.
Application:
These oils are used for all normal quenching operations on a wide variety of steel to impart the desired hardness to components without distortion. The special compounding agent incorporated in these oils improves the wetting ability of the oil, so that it provides faster initial cooling for optimum hardness, where as the base oil ensures slow cooling in the final stage for stress relief and distortion free results.
These oils are normally used for hardening nuts, bolts, ball bearings and certain types of brake drums as well as many other components manufactured by automobile and light engineering industries. The oil is suitable for hardening of a variety of ball bearings, high speed steel tools, and other components in major industries |
|
 Approx. Rs 150 / Litre(s) |
Description: A mixture of liquid hydrocarbons obtained from petroleum. It is used as laxative, lubricant, ointment base, and emollient
Application:
Medicinal liquid paraffin is a very highly refined mineral white oil used in cosmetics and for medical purposes |
|
 Approx. Rs 150 / Litre(s) |
Description:
Silicone oils (polymerized siloxanes) are not silicone but rather silicon analogues of carbon based organic compounds, and can form (relatively) long and complex molecules based on silicon rather than carbon. Chains are formed of alternating silicon-oxygen atoms (...Si-O-Si-O-Si...) or siloxane, rather than carbon atoms (...C-C-C-C...). Other species attach to the tetravalent silicon atoms, not to the divalent oxygen atoms which are fully committed to forming the siloxane chain. A typical example is polydimethyl siloxane, where two methyl groups attach to each silicon atom to form (H3C)[SiO(CH3)2]nSi(CH3)3. The carbon analogue would be an alkane, e.g. dimethylpropane C5H12 or (H3C)[C(CH3)2](CH3).
Application:
Silicone oils could be a basis for silicon-based organic life, but their more prosaic, primary uses are lubricants or hydraulic fluids. They are excellent electrical insulators [1] and, unlike their carbon analogues, are non flammable. Their temperature-stability and good heat-transfer characteristics make them widely used in laboratories for heating baths ("oil baths") placed on top of hotplate stirrers. Silicone oil is also commonly used as the working fluid in diffusion pumps.
Some silicone oils such as simethicone are potent anti-foaming agents. They are used in industrial applications such as distillation or fermentation where excessive amounts of foam can be problematic. They are sometimes added to cooking oils to prevent excessive frothing during deep frying. Silicone oils used as lubricants can be inadvertent defoamers (contaminants) in processes where foam is desired, such as in the manufacture of polyurethane foam. Silicone oil is also one of the two main ingredients in Silly Putty, along with boric acid.
|
|
 Approx. Rs 150 / Litre(s) |
Description:
These grades have been formulated to impart special frictional characteristics that overcome the stick-slip motion, ordinarily associated with slow moving machine parts. They are also fortified with mild EP and rust preventive properties.
Application:
These oils are recommended for slideway lubrication of planners, grinders, horizontal boring machines, shapers, jig borers etc involving high precision work and are also recommended for lubrication of gears by oil can. These oils can be also used for machine tools combined hydraulic and way lubrication systems.
|
|
 Approx. Rs 150 / Litre(s) |
Description:
These oils are low viscosity lubricants manufactured from highly refined base stocks possessing excellent chemical and oxidation stability and further fortified with carefully selected oxidation and rust inhibitors, anti-wear and antifoam agents.
Application:
These oils are recommended for lubrication of textile and machine tools, spindle bearings, timing gears, centrifugal separators, positive displacement blowers and hydraulic systems of certain high precision machine tools.
|
|
 Approx. Rs 150 / Litre(s) |
Description:
These oils are highly refined steam cylinder lubricating oils, compounded with specially selected materials, which can withstand high temperatures, these oils have excellent oiliness, good film strength characteristics and resist water wash out.
Application:
These oils are recommended for steam cylinder lubrication under wet saturated steam conditions. These oils are not suitable for such applications where the steam condensate is re-used by mixing with boiler feed water. These oils are also recommended for lubrication of worm gears. Other major uses include lubrication of paper and textile mill calendar bearings and sugar mill roller bearings.
|
|
 Approx. Rs 150 / Litre(s) |
Description:
These grades are specifically formulated with additives to improve adhesiveness and film strength characteristics. They provide persistence of oil film to an unusual degree and have marked influence in reducing power consumption, wear and maintenance costs.
Application:
These grades are general purpose lubricants for ‘once through’ application situation in Textile Mills, Paper Mills and Machine Tools.
|
|
 Approx. Rs 150 / Litre(s) |
Description:
Vacuum Pump Oil are specially developed oil having low vapor pressure and high thermal stability.
Application:
It is recommended for high vacuum producing delusion pumps.
|
|
|
