INDUSTRIAL CUTTING OIL

Approx. RS 150 / Liter(s).

Description:

This is a soluble type high quality cutting oil which yields rich milky emulsion with water. Special emulsifier is incorporated to ensure its complete dispersion in water. The emulsion formed is homogeneous and stable in nature, and does not split during usage or routine machine shut down periods, under normal conditions. This oil contains rust inhibitors, which impart anti-rust and anti-corrosive properties to the emulsion. Carefully selected biocide is incorporated to prevent bacterial growth in the emulsion.

Application:

This oil is recommended for variety of cutting operations on ferrous and non-ferrous metals. The oil is specially suitable for metal working operations where the cooling property is more desirable compared to the lubricating characteristics. This grade can also be used with advantage in cold rolling of steel and not rolling of aluminium. To obtain stable emulsion, oil should be added to water and not vice versa. A homogeneous dispersion of oil in water can be obtained by continuous stirring either manually or mechanically while preparing the emulsion. This oil is normally used in concentration of 5% for mot machining operations. For grinding operations more dilute emulsions are preferred.

Approx. RS 150 / Liter(s).

Description:

These are active type neat cutting oils and these oils contain a sulphurised fatty material, which improves oiliness property thus providing better surface finish. Sulphur incorporated in these oils become chemically active at the tool-work piece-chip interface and ensures protection to the cutting tool over a wide range of operating temperatures.

Application:

These oils are recommended for most of the cutting operations on ferrous metals under severe operating conditions, which demand high degree of chemical activity in oils. This oil is suitable for machining operations on high tensile stainless steel as well as Ni-Cr alloys by automatics, gear cutting, hobbing, drilling, reaming and thread cutting machines. To obtain best results with the use of this product, it is necessary that a copious flow of oil at low pressure is maintained at the cutting area. The use of these oils for cutting operation on non-ferrous metals and its contact with soft metal bushes in machines should be avoided.